GB/1591 Q355NEZ35 steel plate supplier
GB/1591 Q355NEZ35 plate is not only a low-temperature high-strength steel. It is also a low-carbon steel. It has Z-direction performance. The impact testing temperature is -40 degree impact. Q355NEZ35 steel plate has high strength, good fatigue resistance
Q355NC material chemical composition
Q355NC material chemical composition (%) C: not greater than 0.20 Si: not greater than 0.5 Mn: 0.90-1.65 P: 0.030, S: 0.030 Nb: 0.005-0.05 V: 0.01-0.12, Ti: 0.006-0.05 Cr: not greater than 0.30 Ni: not greater than 0.50, Cu : Not more than 0.40 Mo: not mo
Q420q material
Q420q material is a kind of structural steel plate for bridges. The Q420q steel grades are Q420qD, Q420qE, and Q420qF under Q420q quality. When the Q420q steel plate is required to have performance in the thickness direction.
GB/T 714-2008 Q420qC bridge steel
GB/T 714-2008 Q420qC material is a Chinese steel grade bridge steel. We can supply Q420qC bridge steel plates and sheets with thickness up to 100mm.
What is the application field of Q355GNH plate?
Compared with stainless steel, Q355GNH plate weathering steel requires only a small amount of alloying elements, such as phosphorus, copper, chromium, nickel, molybdenum, niobium.
SA572 Gr 50 thick steel plates mill
Katalor Steel Mill can produce extra wide and SA572 Gr 50 thick steel plates. As low-alloy high-strength structural steel, our SA572Gr50 steel plates have been exported to South Korea, Taiwan and other places. The cumulative export volume has reached more
A387 Gr11 CL2 steel for high pressure service
A387 Gr11 CL2 steel for high pressure serviceA387 Gr11 CL2 equivalent: 12Cr2Mo1R
The maximum thickness of steel can reach 250mm thickness
What grade is equal to A36 material?
ASTM A36 material is a carbon structural steel. It has good weldability and machining ability. ASTM A36 specification covers carbon steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges.
A283C Steel Vs S235JR Steel
A283C steel is equal to EN10025-2 S235JR material. Do you have any difference? The company can supply and export A283C steel hot rolled plates, steel sheets and S235JR steel angles. Welcome to contact us for any need.
The function of the alloy element of the wear plate
The toughness of the wear-resistant plate( wear plate) is higher than that of the high-chromium cast iron. The wear resistance is more than 3 times that of the high-chromium cast iron. Wear-resistant steel plates have broad application prospects, and will
15CrMo steel plate spot 2020
15CrMo heat-resistant steel can resist the corrosion generated in the process of oil cracking. 15CrMo heat-resistant steel is used as reheat steam pipe, petroleum cracking pipe, boiler hanger, steam turbine cylinder liner. The company has high quality 15
What is the properties of 40# steel?
40# steel is a high-quality carbon structural steel, 40# represents a carbon content of 0.40%, the actual content is 0.37% ~ 0.44%. High quality means that the content of P and S is required, the content of p must not be greater than 0.035%, the content o
Q355C Steel Material
Q355C steel belongs to the Q355 low-alloy high-strength steel under GB/T1591-2018 standard. There are also Quality B, and Quality D. Q355B, Q355C and Q355D have little differences in chemical composition and mechanical properties. Below is the detailed in
40Cr Steel Vs 45# Steel
40Cr steel belongs to gb3077 "alloy structural steel". The highest hardness of medium carbon steel after heat treatment is about HRC55 (hb538), and σ B is 600-1100mpa. Therefore, medium carbon steel is widely used in all kinds of medium strength applic
A387 Gr.91 steel chemical elements
A387 Gr.91 (A387 Grade 91) steel is a chromium-molybdenum alloy steel, which can be used in large nuclear power plants. The Chromium-Molybdenum combination gives these plates corrosion-combating skills along with an enhanced tensile strength at raised tem