NM400 wear plate thickness 6-50mm reliable distributor
Katalor Industry is a reliable distributor of NM400 wear plate 6-50mm thick.NM400 wear-resistant plate has high wear resistance and good impact performance. It can be cut, bent, welded, etc.. It also can be connected with other structures by welding, pl
What is the function of NM360 wear-resistant steel?
NM360 wear-resistant steel plate is widely used in mining machinery, coal mine machinery, environmental protection machinery. Function: It is to provide cover for the occasions or parts that need to be worn, so that the life of the facility is longer, and
Prime quality NM500 wear-resistant steel plate stock for sale
NM500 material is a high-strength wear-resistant steel plate with high abrasion resistance, with a Brinell hardness value of 500 (HBW). Below is our NM500 wear plate September stock in Shanghai. For prime quality NM500 hot rolled plate factory direct pri
40Cr alloy structural steel plate Katalor Industry supply 300 tons stock
40Cr alloy steel plate is one of the most widely used steels in the machinery manufacturing industry, suitable for making medium-sized plastic molds. Katalor Industry supply 300 tons stock 40Cr alloy structural steel plates with cutting service.
5.5mm SS400 carbon steel plate market price in Tangshan
According to feedback from traders, there are many inquiries in the market today, but some of them are speculative, and most businesses are more optimistic about the market outlook. Tangshan SS400 carbon steel plate and sheet market prices are expected to
A106 Grade B seamless carbon steel pipe specification
ASTM A106/A106M covers A106 Grade B seamless carbon steel pipe for high-temperature service in specification NPS 1 ⁄ 8 - 48 (DN 6 -1200mm) inclusive, with nominal (average) wall thickness as given in ASME B 36.10M. Generally, this kind of seamless pipe is
Spot NM360 wear plate factory
In terms of stress state, medium and low stress wear accounts for more than 90%, and high stress state wear only accounts for about 5%. It poses a challenge for the NM360 wear-resistant plate, requiring work hardening under low and medium stress condition
GB5310 seamless steel pipe for high pressure boiler
GB5310 seamless steel pipes are used for heating surface tubes, headers, economizers, superheaters, reheaters, etc. of high-pressure boilers (the working pressure is generally above 9.8MPa and the working temperature is between 450℃ and 650℃).
SM570 steel plate for engineering machinery use
SM570 steel plate is a low-alloy high-strength steel plate grade in the Japanese standard JIS G3106-1995 "Rolled Steel for Welded Structures", and its strength and grade are the highest in the Japanese standard.
SM570 steel plates stock list in Katalor Industry
JIS G3106-2008 SM570 material is a low-alloy high-strength plate. It has high strength and low-temperature impact toughness, and SM570 steel plate is widely used in engineering machinery, bridges, containers, vehicles, power equipment and other structural
Q460C quenched and tempered steel plate stock
Q460C quenched and tempered steel is a Chinese material high strength steel grade under GB/T 16270-2009 standard. Q460C material owns the minimum yield strength above 460 Mpa for the thickness equal or above 16mm, and tensile strength shall be above 550 M
What is the delivery condition of Q345qC, Q345qD, Q345qE steel plates?
Standard: GB/T 714-2008Q345qC steel equivalent: A709 Gr 50 steel
The Q345qC, Q345qD, Q345qE steel plates delivered in the normalized state should be subjected to high temperature tempering treatment (tempering temperature not less than 580℃)
NVD steel plates technological process
NVD (DNV Grade D) steel plate technological process:Double-length slab storage → NVD slab cutting → fixed-length slab storage → slab loading → slab charging → slab heating → slab discharge → slab rough descaling → rolling fine descaling → steel plate co
CCSB hot rolled plate stock list
CCSB material is short for CCS Grade B steel with tensile strength 400-520MPa. BBN steel is a professional shipbuilding steel products factory in Henan Province. We have 1000 tons CCSB steel plate, CCSB hot rolled sheet, CCS-B steel angles in warehouse. B
Q355ND low alloy steel plate
GB/T1591-2018 Q355ND steel is a low-alloy high-strength structural steel. Q355ND plate is not only high-strength steel, it is also low-carbon steel.Q355ND low alloy steel plate has high strength, good fatigue resistance; high toughness and low brittlen
