SAE 4130, 4140 and 4145 series steel is a family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromol
Abrex 400 steel is abrasion resistant steel or wear resistant steel plate (wear plate). Abrasion resistant steel is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Typical applications are in truck beds, att
Q690ZTE steel for offshore platform description
Grade: Q690ZTE
Category: low alloy steel
Executive standard: GB/T 31945-2015 steel plate for jack-up platform legs
Delivery status: quenching and tempering
Application: steel for ships and marine engin
The non-alloy quality steel P245NB under EN 10120:2008 standard is steel sheet and strip for welded gas cylinders. BBN steel can supply P245NB sheet and strip up to thicknesses of 5 mm. The steel is weldable by the usual arc welding methods.
NM500 steel is an abrasion resistant plate (AR steel plate) with a hardness of 500 HBW. It is intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. NM500 AR steel plate offers very goo
A387 Gr11 CL2 chromium-molybdenum alloy steel plate has the ability to prevent hydrogen embrittlement, hydrogen corrosion, hydrogen peeling, and sulfide corrosion in a medium temperature (350 ~ 480 ℃) hydrogen environment. At the same time, it has good lo
Like other low carbon steels ASTM A36 A572, A517 low alloy steel has outstanding tensile and yield properties across a broad operating temperature range. Nominal values for A517 B plates are earmarked at around 928 MPa tensile and 687 MPa yield strengths
A285 GrC material is a medium and low-strength carbon steel plate for pressure vessels. It is mainly used to make fixed boilers, hull boilers and other important boiler accessories.
A285 GrC steel equivalentEN 10028-2 P235GH, DIN 17155
Hot rolled Q345B steel coils are widely used in bridges, vehicles, ships, buildings, pressure vessels, etc. Supply hot rolled Q345B steel coil with competitive price.
Q345B low-alloy T-shaped steel is widely used in various building structures and engineering structures, such as building beams, bridges, power transmission towers, lifting and transporting machinery, ships, industrial furnaces, reaction towers, container
The purpose of quenching is to transform the supercooled austenite into martensite or bainite to obtain a martensite or bainite structure, and then use tempering at different temperatures to greatly increase the strength, hardness, and wear resistance of
The A516 Gr.70 steel workpiece has the following characteristics after quenching:
1. Unbalanced (ie unstable) structures such as martensite, bainite, and retained austenite are obtained.
2. There is a large internal stress.
3. The mechanical properties
DIN 17102 StE355 steel is a hot rolled products in the form of flats, plate, coils, and wide flats, sections and round bars of weldable fine grain structural steels. We are committed to exceed customer's expectation on the basis of StE355 steel coils pri
Steel Grades Q370qC, Q370qD, and Q370qE are structural steel plates for bridges. It is required to have high strength, toughness and bear the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmosph
Q890D material is a quenched and tempered steel plate for high-strength structure. In the grade, "Q" means yield, "890" means yield value, and "D" means grade. It is similar to the material S890Q. EN 10025-6 S890Q steel is a high strength, and tough