The storage method of 09CuPCrNi-A weather resistant steel plate

09CuPCrNi-A weather resistant steel plate should not be directly stacked on the ground or cement ground, and the distance from the ground should not be less than 0.20m. In order to avoid moisture and dust pollution of 09CuPCrNi-A weather resistant steel plate, 09CuPCrNi-A weather resistant steel plate should not be placed in dusty and damp places. Both ends must be tied with plastic paper or packaging bags to prevent dust from entering.

09CuPCrNi-A weather resistant steel plate should be placed in the designated rack or stacking position according to the heat number (batch number), variety, specification and material. The same rack or stacking position is not allowed to store 09CuPCrNi-A weather resistant steel plate with the same specifications (or similar), the same material shape and different heat numbers.

In order to prevent the 09CuPCrNi-A weather resistant steel plate from bending or damage, the 09CuPCrNi-A weather resistant steel plate should be placed on the sleepers with appropriate spacing and on the same level to ensure that one end of the 09CuPCrNi-A weather resistant steel plate is aligned. If 09CuPCrNi-A weather resistant steel plate is stacked without a rack, wooden wedges should be properly placed or other methods should be used to prevent 09CuPCrNi-A weather resistant steel plate from rolling.

The 09CuPCrNi-A weather resistant steel plate that has been cold rolled, cold drawn or bright annealed is not allowed to be stored in the open air. If restricted by inventory conditions, appropriate protective measures should be taken when storing in the open air to avoid media corrosion such as rain, snow, fog, and a large amount of dust pollution.

Pre: What are characteristics of alloy steel?

Next: How to judge the quality of boiler steel plate?