Alloy 1018 is the most commonly available of the cold-rolled steels. It is generally available in round rod, square bar, and rectangle bar. It has a good combination of all of the typical traits of steel - strength, some ductility, and comparative ease of machining. Chemically, it is very similar to A36 Hot Rolled steel, but the cold rolling process creates a better surface finish and better properties.
Minimum Properties
Ultimate Tensile Strength, psi 63,800
Yield Strength, psi 53,700
Elongation 15.0%
Rockwell Hardness B71
Iron (Fe) 98.81 - 99.26%
Carbon © 0.18%
Manganese (Mn) 0.6 - 0.9%
Phosphorus (P) 0.04% max
Sulfur (S) 0.05% max
ASTM A36 steel is the most commonly available of the hot-rolled steels. It is generally available in round rod, square bar, rectangle bar, as well as steel shapes such as I-Beams, H-beams, angles, and channels. The hot roll process means that the surface on this steel will be somewhat rough. Note that its yield strength is also significantly less than 1018 - this means that it will bend much more quickly than will 1018. Finally, machining this material is noticeably more difficult than 1018 steel, but the cost is usually significantly lower.
Ultimate Tensile Strength, psi 58,000 - 79,800
Yield Strength, psi 36,300
Elongation 20.0%
Iron (Fe) 99%
Carbon © 0.26%
Manganese (Mn) 0.75%
Copper (Cu) 0.2%
Phosphorus (P) 0.04% max
Sulfur (S) 0.05% max
As the professional Chinese A36 and 1018 Mild (low-carbon) steel supplier, we will supply our customers the best quality with the competitive price ,the best service and rapid delivery time. If you purchase the A36 and 1018 Mild (low-carbon) steel, we support you to pay a visit to our company and do inspection about A36 and 1018 Mild (low-carbon) steel. If you have any need, you are welcome to contact me .We are sincerely looking for your cooperation for A36 and 1018 Mild (low-carbon) steel A36 and 1018 Mild (low-carbon) steel.