We use these ASME SA213 T11 Alloy Steel Pipe for boiler in different size ranges. In addition, we can also customize according to ASME SA213 T11 Alloy Steel Pipe for boiler requirements. To ensure the best quality standards, we obtain these standards from quality manufacturers. We also provide our customers with their own trademarks.
The application of ASME SA213 T11 Steel Pipe for boilers:
ASME SA213 T11 Alloy Steel Pipe for boiler used for Boiler applied to Industrial Boilers, Power Plants and Nuclear Plants
ASME SA213 T11 Boiler Pipe High Pressure Steel Tube Chemical Composition :
Grade |
UNS |
C, % |
Mn, % |
P, % |
S, % |
Si, % |
Cr, % |
Mo, % |
T11 |
K11597 |
0.15 max |
0.30-0.60 |
0.025 max |
0.025 max |
0.50-1.00 |
1.00-1.50 |
0.44-0.65 |
Seamless Heat Exchange ASME SA213 T11 Alloy Steel Pipe for boiler Mechanical properties:
Tensile Strength , MPa |
Yield Strength, MPa |
Elongation, % |
Hardness, HB |
415 min |
205 min |
30 min |
179 max |
ASME SA213 T11 Alloy Steel Pipe for boiler Outside Diameter & Tolerance :
Outside Diameter |
OD Tolerance |
WT Tolerance |
Ovality Tolerance |
Cut Length Tolerance |
OD≤ 12, 7 mm |
± 0, 13 mm |
± 15 % |
– |
+ 3, 18 mm, – 0 mm |
12, 7 mm < OD ≤ 38, 1 mm |
± 0, 13 mm |
± 10 % |
max, 1, 65 mm |
+ 3, 18 mm, – 0 mm |
38, 1 mm < OD ≤ 88, 9 mm |
± 0, 25 mm |
± 10 % |
max, 2, 41 mm |
+ 4, 76 mm, – 0 mm |
Orders for ASME SA213 T11 Alloy Steel Pipe for boiler under this specification should include this information (OD、Wall thickness 、length and quantity) . Katalor welcome new and old clients of ASME SA213 T11 Alloy Steel Pipe for boiler to send inquiry to katalor. we will reply your inquiry of ASME SA213 T11 Alloy Steel Pipe for boiler on time.