ASME SA210A1 Alloy Steel Pipe is used For heating pipes with low and medium pressure boilers (working pressure is generally not more than 5.88Mpa, working temperature is below 450°C); ASME SA210A1 Alloy Steel Pip used in high pressure boilers (working pressure is generally above 9.8Mpa, working temperature is between 450°C and 650°C) Heating surface tube, economizer, superheater, reheater, petrochemical industrial pipe, etc. katalor has ASME SA210A1 Alloy Steel Pipe for boiler on sale.
The application of ASME SA210A1 Alloy Steel Pipe for boiler:
ASME SA210A1 Alloy Steel Pipe for boiler is used For high, middle, low pressure boiler and pressure purpose
ASME SA210A1 Alloy Steel Pipe for boiler Mechanical & Physical Properties:
Standard |
Grade |
Tensile Strength(MPa) |
Yield Strength(MPa) |
Elongationδ(%) |
ASME SA210 |
A-1 |
≥ 415 |
≥ 255 |
≥30 |
C |
≥485 |
≥275 |
≥30 |
ASME SA210A1 Alloy Steel Pipe for boiler Chemical Composition(%):
Standard |
Grade |
chemical composition: |
||||
C |
Si |
Mn |
P |
S |
||
ASME SA210 |
A-1 |
≤0.27 |
≥0.10 |
≤0.93 |
≤0.035 |
≤0.035 |
C |
≤0.35 |
≥0.10 |
0.29-1.06 |
≤0.035 |
≤0.035 |
ASME SA210A1 Alloy Steel Pipe for boiler Note:
HR:hot rolled |
CW:cold worked |
SR:stress relieved |
A:annealed |
N:normalized |
HF |
The ASME SA210A1 Alloy seamless Steel pipe for boiler specification:
OD: 10.3mm-965.2mm
Wall thickness 1.0mm-120mm
Length: 5-12m
MOQ: 10 Metric Tons
ASME SA210A1 Alloy seamless Steel pipe for boiler Delivery Condition: Annealed, Normalized, Normalized and Tempered
ASME SA210A1 Alloy seamless Steel pipe for boiler Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength,
Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
ASME SA210A1 Alloy seamless Steel pipe for boiler Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting