0086-18317160019 [email protected]
About
Phone
0086-18317160019
E-mail : [email protected]
Address: No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China
Your location : Home > Alloy > Tungsten Tungsten

AMS-T-21014 Class 2 Tungsten Alloy

Date : 2016-04-21 10:58:45

AMS-T-21014 Class 2 applications for tungsten alloy rod:These kinds of rods could be machined further, which are usually used to making the parts of counterweight,AMS-T-21014 Class 2 radiation shielding, military defense appliance, welding rod, AMS-T-21014 extrusion die, also for some sports fields, such as darts, billets, golf club, etc. Besides, we can manufacture and offer tungsten alloy rod as the counterpart of Anviloy 1150, whose properties are much similar.

AMS-T-21014 Class 2 Tungsten Alloy Product Description

Diameter: 2.0-100.0mm
Length: 50-1000mm
Density: 15.8-18.75 g/cm3
Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
AMS-T-21014 Class 2 Tungsten Alloy Surface: Sintering surface, Forged surface, Ground surface
AMS-T-21014 Class 2 Tungsten Alloy Advantages
High density(17.0-18.5g/cm3).
Good machinability
Good mechanical properties.
High modulus of elasticity
High absorption capacity against x-rays and γ-rays

Harmless to the health and environments.


AMS-T-21014

Class 2

Class 2

Composition

92W5Ni3Fe

93W4Ni3Fe

Density (g/cm3)

17.50±0.15

17.60±0.15

Heat Treatment

Sintering

Sintering

Tensile Strength (MPa)

900-1100

900-1100

Elongation (%)

16-26

16-24

Hardness(HRC)

25-29

26-30

 


AMS-T-21014

Class 2

(AMS 7725C)

-

ASTM-B-777-99

Class 2

Density Gms/cc
Density Lbs/cu. in.

17.5
.632

Hardness Rockwell C

26

Ultimate Tensile
Strength (PSI)

114,000

Yield Strength
.2% offset (PSI)

84,000

Elongation (% in 1″)

7

Proportional Elastic
Limit (PSI)

46,000

Modules of
Elasticity (PSI)

47 x 10^6

Coefficient of Thermal
Expansion
X 10 -6/°C (20-400°C)

4.62

Thermal Conductivity
(CGS Units)

.20

Electrical Conductivity
(% IACS)

13

Magnetic Properties

Slightly Magnetic

17.6 (92.5%W, Balance Ni Fe)

AMS-T-21014

Dimetal

(AMS 7725C)

-

ASTM-B-777-99

-

Density Gms/cc
Density Lbs/cu. in.

17.6
.636

Hardness Rockwell C

30

Ultimate Tensile
Strength (PSI)

120,000

Yield Strength
.2% offset (PSI)

90,000

Elongation (% in 1″)

4

Proportional Elastic
Limit (PSI)

55,000

Modules of
Elasticity (PSI)

52 x 106

Coefficient of Thermal
Expansion
X 10 -6/°C (20-400°C)

4.5

Thermal Conductivity
(CGS Units)

.27

Electrical Conductivity
(% IACS)

14

Magnetic Properties

Slightly Magnetic

17.7 (93%W, Balance Ni Fe)

AMS-T-21014

Super Chatter Free

(AMS 7725C)

-

ASTM-B-777-99

-

Density Gms/cc
Density Lbs/cu. in.

17.7
.639

Hardness Rockwell C

32

Ultimate Tensile
Strength (PSI)

125,000

Yield Strength
.2% offset (PSI)

95,000

Elongation (% in 1″)

4

Proportional Elastic
Limit (PSI)

60,000

Modules of
Elasticity (PSI)

53 x 10^6

Coefficient of Thermal
Expansion
X 10 -6/°C (20-400°C)

4.5

Thermal Conductivity
(CGS Units)

.27

Electrical Conductivity
(% IACS)

14

Magnetic Properties

Slightly Magnetic

18 (95%W, 3.5%Ni, 1.5%Cu)

As a AMS-T-21014 Class 2 Tungsten Alloy manufacturer, we usually keep hundreds tons AMS-T-21014 Class 2 Tungsten Alloy in stock each month. Based on these stock source, our advantage has spread into steel process like : cutting ( any size and any shape ) drilling, welding, milling, welding. We can also provide the AMS-T-21014 Class 2 Tungsten Alloy in machining parts and steel structure.

Contact Us

TEL : 0086-18317160019

E-mail : [email protected] 

Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China