Nonmagnetic Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy Inconel 600 was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures.
The high nickel content in high strength Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.
Alloy 600 is a nonmagnetic, nickel-based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.
Corrosion and high temperature resistance Incoel 600 alloy also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high chromium content of alloy 600 raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
Inconel 600 alloy exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.
Some typical applications of high temperature resistance Incoel 600 alloy are:
Barge and tank truck liners
Carburizing atmospheres
Ethylene dichloride crackers
Furnace trays, mufflers, hangers
Gasoline stabilizer production
Vacuum furnace fixtures
MgCl2 evaporates
Phenol condensers
Soap manufacture
Titanium dioxide
Vegetable and fatty acid vessels
Mechanical Properties of Inconel 600
Product Form |
Condition |
Tensile (ksi) |
0.2% Yield (ksi) |
Elongation (%) |
Hardness (HRB) |
Rod & Bar |
Cold-Drawn |
80-100 |
25-50 |
35-55 |
65-85 |
Rod & Bar |
Hot-Finished |
80-100 |
30-50 |
35-55 |
65-85 |
Tube & Pipe |
Hot-Finished |
75-100 |
25-50 |
35*55 |
- |
Tube & Pipe |
Cold-Drawn |
80-100 |
25-50 |
35-55 |
88 Max |
Plate |
Hot-Rolled |
80-105 |
30-50 |
35-55 |
65-85 |
Sheet |
Cold-Drawn |
80-100 |
30-45 |
35-55 |
88 Max |
Chemical Composition of Inconel 600, %
Ni + Co |
Cr |
Fe |
C |
Mn |
S |
Si |
Cu |
72.0 min |
14.0-17.0 |
6.0-10.0 |
.15 max |
1.00 max |
.015 max |
.50 max |
.50 max |
Typical Elevated Temperature Tensile Properties
Temperature |
Tensile Strength |
0.2% Yield Strength |
% Elongation |
|||
°F |
°C |
ksi |
MPa |
ksi |
MPa |
|
600 |
316 |
90.5 |
624 |
31.0 |
214 |
46 |
ShangHai Katalor Steel is the most competitive manufacture and supplier of Inconel 600 steel material, If you have any requirement for Inconel 600 nickel in competitive price and faster delivery time, please contact us.
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China