Hastelloy B-3 is an additional member of the nickel-molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. Hastelloy B-3 also withstands sulfuric, acetic, formic and phosphoric acids, and other nonoxidizing media. Hastelloy B-3 has a special chemistry designed to achieve a level of thermal stability greatly superior to that of its predecessors, e.g.
Hastelloy B-3 Nominal Chemical Composition, Weight Percent
Ni |
Mo |
Cr |
Fe |
Co |
W |
Mn |
Al |
Ti |
Si |
C |
65 min |
28.5 |
1.5 |
1.5 |
3 max |
3 max |
3 max |
0.5 max |
0.2 max |
0.1 max |
0.01 max |
Hastelloy B-3 Tensile Properties, Sheet
Test Temperature |
Ultimate Tensile Strength |
Yield Strength at 0.2% Offset |
Elongation in 2 in (51mm) |
|||
°F |
°C |
Ksi |
MPa |
Ksi |
MPa |
% |
Room |
Room |
125.0 |
860 |
60.6 |
420 |
53.4 |
200 |
95 |
120.7 |
830 |
55.3 |
380 |
56.9 |
400 |
205 |
110.0 |
760 |
47.0 |
325 |
59.7 |
600 |
315 |
104.4 |
720 |
43.5 |
300 |
63.4 |
800 |
425 |
102.0 |
705 |
42.4 |
290 |
62.0 |
1000 |
540 |
97.8 |
675 |
39.0 |
270 |
59.0 |
1200 |
650 |
103.5 |
715 |
45.8 |
315 |
55.8 |
Hastelloy B-3 Tensile Properties, Plate
Test Temperature |
Ultimate Tensile Strength |
Yield Strength at 0.2% Offset |
Elongation in 2 in (51mm) |
|||
°F |
°C |
Ksi |
MPa |
Ksi |
MPa |
% |
Room |
Room |
128.3 |
885 |
58.2 |
400 |
57.8 |
200 |
95 |
122.4 |
845 |
54.1 |
375 |
58.2 |
400 |
205 |
115.1 |
795 |
47.6 |
330 |
60.9 |
600 |
315 |
111.2 |
765 |
44.4 |
305 |
61.6 |
800 |
425 |
108.2 |
745 |
41.3 |
285 |
61.7 |
1000 |
540 |
105.6 |
730 |
39.6 |
275 |
61.7 |
1200 |
650 |
106.9 |
735 |
42.0 |
290 |
64.6 |
Available in Wrought Form of Hastelloy B-3
Hastelloy B-3 alloy is available in the form of plate, sheet, strip, billet, bar, wire, pipe and tubing.
Applications of Hastelloy B-3
Hastelloy B-3 alloy is suitable for use in all applications previously requiring the use of Hastelloy B-2 alloy. Like B-2 alloy, Hastelloy B-3 is not recommended for use in the presence of ferric or cupric salts as these salts may cause rapid corrosion failure. Ferric or cupric salts may develop when hydrochloric acid comes in contact with iron or copper.
ASME Boiler And Pressure Vessel Code of Hastelloy B-3
ASME has published Code Case 2140 for solution annealed Hastelloy B-3 alloy (UNS N10675). The alloy is also covered by ASTM specifications B333 (plate, sheet and strip), B335 (bar), B366 (welded fittings), B564 (forgings), B619 (welded pipe), B622 (seamless pipe and tube) and B626 (welded tube).
Shanghai Katalor Enterprises Co.,Ltd is committed to delivering a consistently high level of customer service, offering competitively low prices, and providing high quality Hastelloy B-3 to meet the customer demands.If you have any requirements, please contact us immediately!
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China