HASTELLOY C-4 alloy is a nickel-chromium-molybdenum alloy with outstanding high-temperature stability as evidenced by high ductility and corrosion resistance even after aging in the 1200 to 1900°F (649 to 1038°C) range. HASTELLOY C-4 alloy can be forged, hot-upset, and impact extruded. Although the alloy tends to work-harden, it can be successfully deep-drawn, spun, press formed or punched.
HASTELLOY C-4 alloy Chemical Composition
Chemical Composition |
Element |
Cr |
Mo |
Fe |
C |
Si |
Co |
Mn |
P |
S |
Ti |
Min % |
14 |
14 |
- |
- |
- |
- |
- |
- |
- |
- |
|
Max % |
18 |
17 |
3 |
0.015 |
0.08 |
2 |
1 |
0.04 |
0.03 |
0.7 |
HASTELLOY C-4 alloy Properties
Properties |
||||
Condition |
Approx. tensile strength |
Approx. operating temperature |
||
N/mm² |
ksi |
°C |
°F |
|
Annealed |
800 - 1100 |
116 - 159 |
-200 to +400 |
-330 to +750 |
Spring Temper |
1300 - 1500 |
189 - 218 |
-200 to +400 |
-330 to +750 |
HASTELLOY® C-4 Alloy is used mainly in:
- flue gas desulfurization
- regeneration of pickling baths in manufacturing plants
- Components in the production of acetic acid and the production of chemical fertilizers and pesticides
HASTELLOY C-4 alloy plate, sheet, strip, bar, tubing and pipe are covered by ASME specifications SB-574, SB-575, SB-6119, SB-622 and SB-626 under UNS number N06455.
We can supply HASTELLOY C-4 alloy plates or sheets, tubes, flanges, forged or die-cut rings and round blanks, elbows, T-fittings, reductions, screws, nuts or washers according to your request. According to your individual wishes, we are able to cut our material with our plasma- or water jet cutter. Our material is stocked in superformats of 2000x6000mm. Cut to size on request.If you need hastelloy c-4 alloy ,please contact us by email [email protected] ,we will reply you as soon as possiable!
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China