0086-18317160019 [email protected]
Alloy K 500 mainly used pump shaft and impeller,conveyor,scraper,oil well drill collar,elastic etc .Other can also manufacture various kinds of heat exchange treatment oil and chemical pipelines,containers,towers,tanks, pumps,etc.Due to the low corrosion rate in flowing sea water and the alloy of high strength, therefore,Alloy K 500 is suitable for the manufacture of sea water corrosion centrifugal pump shaft.
Alloy K 500 Steel machining parts Chemical Requirements:
|
Weight% |
Ni |
Cu |
Fe |
Al |
|||||
|
Alloy K 50 |
63max |
27min-33max |
2.0max |
2.3min-3.15max |
|||||
|
si |
S |
Mn |
C |
Ti |
|
||||
|
0.5max |
0.01max |
1.5max |
0.25max |
0.35MIN-0.85MAX |
|
||||
The Mechanical Properties of Alloy K 500 as follows;
|
State |
Tensile strength |
Yield strength 0.2% offset |
Elongation at break % |
|
Ksi |
MPa |
Ksi |
MPa |
|
bar |
70-90 |
482-621 |
25-60 |
We can offer Alloy K 500 Steel Work products according to your drawing with high precision, strictly inspection and excellent performance. Katalor also can offer supreme after sale service about Alloy K 500. If we can have the good cooperation with each other, you will be very welcome to be our agent in your local market of this Alloy K 500.We sincerely hope to be your reliable supplier of Alloy K 500 Steel machining parts. Our company has established long-term partnership with many clients from many countries and has gained a good reputation in the international market.
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China
