Chinese steel grade Q245R
Grade Q245R is a Chinese steel grade material under GB 713 standard. It is a kind of carbon steel and low-alloy high-strength steel. Q245R material is featured by specified elevated temperature properties for pressure vessels. Q245R steel plate density is 7.85g/cm3.
Q245R Steel Plates Application
The Q245R steel plate belongs to the boiler vessel plate and is used to manufacture various boilers and important accessories. Because the boiler steel plate is working under high temperature at medium temperature (below 350 °C), in addition to high pressure, boilers are also subjected to impact, fatigue load and water and gas corrosion. It requires a certain strength and good welding and cold bending performance.
Grade Q245R Steel Plate Parameters
Chemical Requirements (%, heat analysis)
C max. |
Si max. |
Mn |
P max. |
S max. |
Alt (min.) |
0.20 |
0.35 |
0.50-1.00 |
0.025 |
0.015 |
0.020 |
Mechanical Properties of Q245R Steel
Thickness (mm) |
Q245R |
> 3 ≤ 16 |
> 16 ≤ 36 |
> 36 ≤ 60 |
>60 ≤ 100 |
>100 |
Yield strength (≥Mpa) |
245 |
235 |
225 |
205 |
185 |
Tensile strength (Mpa) |
400-520 |
390-510 |
380-50 |
Grade Q245R Steel Equivalent: ASTM Standard Equivalent
Grade |
Standard |
ASTM |
Q245R |
GB 713 |
A435,A577,A578 |
What does Q245R Stand for?
245: indicates the steel min. yield strength value.
Q: the capital letter of the yield Chinese characters “Q”(Qu)
R: P shows the steel application of pressure vessel (Rong)
Pre: A302 Gr.A Normalized Steel Plates
Next: A302 Gr.B Alloy Plates Supplier