ASTM A515 standard covers three grades (A515 Grade 60, Grade 65 and Grade 70) carbon-silicon steel plates. They are mainly used for medium and high temperature welding boilers and other pressure vessels.
A515 Gr.60 and A515 Gr.65 carbon steel plates stock in January
Category |
Grade |
Size(mm) |
Pieces |
Weight(tons) |
Origin |
Hot rolled plate |
A515 Gr.65 |
10*2190*8800 |
1 |
1.513 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*4270*11000 |
1 |
4.683 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*4270*10400 |
1 |
4.427 |
Shanghai |
Hot rolled plate |
A515 Gr.65 |
15.9*2325*12000 |
2 |
6.964 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*2384*9950 |
1 |
2.365 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*2384*11550 |
1 |
2.745 |
Shanghai |
Hot rolled plate |
A515 Gr.65 |
19.1*2790*12410 |
1 |
5.191 |
Shanghai |
Hot rolled plate |
A515 Gr.65 |
18*2001*12410 |
1 |
3.509 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*2384*11000 |
1 |
2.614 |
Shanghai |
Hot rolled plate |
A515 Gr.65 |
10*1875*12410 |
4 |
7.308 |
Shanghai |
Hot rolled plate |
A515 Gr.60 |
12.7*2384*10150 |
1 |
2.412 |
Shanghai |
The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification as follows:
Material |
Maximum Thickness, in. [mm] |
Grade 60 [415] |
8 [200] |
Grade 65 [450] |
8 [200] |
Grade 70 [485] |
8 [200] |
For plates produced from coil and finished without heat treatment or with stress relieving only, the additional requirements including test report shall comply with Specification A20/A20M.