1010 steel is a plain carbon steel with 0.10% carbon content. This steel has relatively low strength but it can be quenched and tempered to increase strength.
1010 steel structure is made by 1010 steel . for more information abou 1010 steel structure , please see the following :
1010 steel structure Chemical composition：
C(％): 0.08～0.13
Mn(％): 0.30～0.60
P(％)≤: 0.040
S(％)≤: 0.050
1010 steel structure Heat treatment
AISI 1010 carbon steel is mostly used in the annealed or case hardened condition. However, it can also be heat treated, quenched and tempered but the cost for performing these processes are very high.
1010 steel structure Cold Working
The cold working capacity of AISI 1010 carbon steel is good. In cases where severe cold working is performed stress relief or full anneal has to be performed.
1010 steel structure Annealing
A full anneal process can be performed for AISI 1010 carbon steel at 871 to 982°C (1600 to 1800°F), which is followed by slow cooling process in the furnace. A stress relief anneal process can also be done at 538°C (1000°F) and then gradually cooled. AISI 1010 carbon steel in the full annealed condition has a tensile strength of about 45 ksi.
1010 steel structure Tempering
Tempering can be performed on AISI 1010 carbon steel, after hardening process is completed, at 316 to 593°C (600 to 1100°F). This depends upon the strength level that is required. When tempering is performed at 538°C (1000 F), the tensile strength will be about 75 ksi.
1010 steel structure Applications
AISI 1010 carbon steel is primarily used for applications such as cold headed fasteners and bolts.
as a 1010 steel structure seporter , any need in 1010 steel structure or 1010 steel structure 1010 steel structure Heat treatment , please contact us!
Pre: 1015 steel structure,1015 steel structure Applications
Next: 58crv4 steel structure,58crv4 steel structure mechanical properties