Processing
EN 10025-2 S235JR/J0/J2 I-beam is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes (or ‘Sections’). EN 10025-2 S235JR/J0/J2 I-beam structural steel grades are designed with specific chemical compositions and mechanical properties formulated for particular applications.
S235JR/J0/J2 Chemical Requirements:
Material |
C% max |
Si % |
Mn % |
P % |
S % |
N % |
Cu % |
Other % |
||
≤16 |
>16,≤40 |
>40 |
max |
max |
max |
max |
max |
max |
max |
|
S235JR |
0.19 |
0.19 |
0.23 |
- |
1.50 |
0.045 |
0.045 |
0.014 |
0.60 |
_ |
0.19 |
0.19 |
0.19 |
- |
1.50 |
0.040 |
0.040 |
0.014 |
0.60 |
_ |
|
0.19 |
0.19 |
0.19 |
- |
1.50 |
0.035 |
0.035 |
_ |
0.60 |
_ |
S235JR/J0/J2Mechanical Properties :
Material |
Tensile strength Mpa |
||||
Normal thickness mm |
|||||
≤3 |
>3,≤100 |
>100,≤150 |
>150,≤250 |
>250,≤400 |
|
S235JR |
360-510 |
360-510 |
350-500 |
340-490 |
- |
S235J0 |
360-510 |
360-510 |
350-500 |
340-490 |
- |
S235J2 |
360-510 |
360-510 |
350-500 |
340-490 |
330-480 |
Material |
Minumum yield strength Mpa |
||||||||
Normal thickness mm |
|||||||||
≤16 |
>16,≤40 |
>40,≤63 |
>63,≤80 |
>80,≤100 |
>100,≤150 |
>150,≤200 |
>200,≤250 |
>250,≤400 |
|
S235JR |
235 |
225 |
215 |
215 |
215 |
195 |
185 |
175 |
|
S235J0 |
235 |
225 |
215 |
215 |
215 |
195 |
185 |
175 |
|
S235J2 |
235 |
225 |
215 |
215 |
215 |
195 |
185 |
175 |
165 |
Material |
Minimum percentage elongation after fracture Mpa % |
||||||||||
L0=80mm Normal thickness mm |
L0=5.65 √ S0 mm Normal thickness mm |
||||||||||
≤1 |
>1,≤0.5 |
>1.5,≤2 |
>2,≤2.5 |
>2.5,<3 |
≥3,≤40 |
>40,≤63 |
>63,≤100 |
>100,≤150 |
>150,≤250 |
>250,≤400 |
|
S235JR |
17 |
18 |
19 |
20 |
21 |
26 |
25 |
24 |
22 |
21 |
|
S235J0 |
16 |
17 |
18 |
19 |
20 |
25 |
24 |
23 |
|
||
S235J2 |
15 |
16 |
17 |
18 |
19 |
24 |
23 |
22 |
21 (I and t) |
Material |
|
|||
Minmum energy (J) Normal thickness mm |
||||
Temperature |
≤150 |
>150,≤250 |
>250,≤400 |
|
S235JR |
20 |
27 |
27 |
_ |
S235J0 |
0 |
27 |
27 |
_ |
S235J2 |
-20 |
27 |
27 |
27 |
I-shaped cross section rolled iron beams, steel beams or steel beams; also refers to a combination of beam-shaped cross-section, in particular for steel structures (such as steel buildings) in the beams. S235JR / J2 / J0 beam with stable performance, reasonable structure, strength and stiffness, low steel strength, toughness, ductility and weld-ability and other characteristics, widely used in various building structures, bridges, vehicles, brackets and machinery . S235JR / J2 / J0 beam cross-section is symmetrical, mechanical properties of the phenomenon appears more stable, at the same time, the stability of the same type of steel I-beam and better!
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China