Processing
S355JR/J2/J0 H beam is divided into ordinary S355JR/J2/J0 H beam and high quality S355JR/J2/J0 H beam according to the different quality of steel smelting. Ordinary S355JR/J2/J0 H beam is divided into large type steel, medium-sized steel, small type steel according to the current metal products catalog. Ordinary S355JR/J2/J0 H beam also can be divided into steel, channel steel, angle steel, H steel, round steel according to the section shape.
If steel structure use hot-rolled S355JR/J2/J0 H beam, steel structure will have scientific and reasonable structure, good flexibility and plasticity, high structure stability, and suitable for bearing vibration and impact load of building structure, strong ability to resist natural disasters, especially suitable for some building structures with the earthquake.
S355JR/J0/J2 H Beam Chemical Composition
|
C% max |
Si % |
Mn % |
P % |
S % |
N % |
Cu % |
Other % |
||
≤16 |
>16,≤40 |
>40 |
max |
max |
max |
max |
max |
max |
max |
|
S355JR |
0.24 |
0.24 |
0.24 |
0.55 |
1.60 |
0.035 |
0.035 |
0.012 |
0.55 |
_ |
0.20 |
0.20 |
0.22 |
0.55 |
1.60 |
0.030 |
0.030 |
0.012 |
0.55 |
_ |
|
S355J2 |
0.20 |
0.20 |
0.22 |
0.55 |
1.60 |
0.025 |
0.025 |
_ |
0.55 |
_ |
S355JR/J0/J2 H Beam Mechanical Properties:
Material |
Tensile strength Mpa |
||||
Normal thickness mm |
|||||
≤3 |
>3,≤100 |
>100,≤150 |
>150,≤250 |
>250,≤400 |
|
S355JR |
510-680 |
470-630 |
450-600 |
450-600 |
_ |
S355J0 |
510-680 |
470-630 |
450-600 |
450-600 |
_ |
S355J2 |
510-680 |
470-630 |
450-600 |
450-600 |
450-600 |
Material |
Minimum elongation percentage after fracture % |
|||||||||||
L0=80mm Normal thickness mm |
L0=5.65 √ S0 mm Normal thickness mm |
|||||||||||
≤1 |
>1,≤0.5 |
>1.5,≤2 |
>2,≤2.5 |
>2.5,<3 |
≥3,≤40 |
>40,≤63 |
>63,≤100 |
>100,≤150 |
>150,≤250 |
>250,≤400 |
||
S355JR |
14 |
15 |
16 |
17 |
18 |
22 |
21 |
20 |
18 |
17 |
|
|
S355J0 |
|
|||||||||||
S355J2 |
17 (I and t) |
Material |
Minimum energy (J) Normal thickness mm |
|||
Temperature |
≤150 |
>150,≤250 |
>250,≤400 |
|
S355JR |
20 |
27 |
27 |
_ |
S355J0 |
0 |
27 |
27 |
_ |
S355J2 |
-20 |
27 |
27 |
27 |
S355JR/J0/J2 H Beam Advantages:
Compared with the H type steel welding, S355JR/J2/J0 H beam can significantly save labor and materials, reduce raw material, energy and labor consumption, low residual stress, good surface appearance and quality. Then, S355JR/J2/J0 H beam is not only easy to mechanical processing, structural connection and installation, but also easy to dismantle and reuse.
Shanghai Katalor Enterprises has been supported oversea shipbuilding project, Oil or Gas project and constructing big infrastructural projects oversea since 2000. We exported S355JR/J2/J0 H beam to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen , Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea and so on. If you have any needs of S355JR/J2/J0 H beam, please do not hesitate to contact us by email [email protected], we can do our best to help you!
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China