Processing
EN 10217-2 standard ERW steel pipes with circular sections, the tubes shall be manufactured by high frequency welding (HFW), minimum frequency 100kHz, EN 10217-2 standard ERW steel pipes finished tubes shall not include welds used for joining together lengths of strip prior to forming.
EN10217-2 P195GH ERW Steel Pipe Chemical Compositio Analysis (%):
Steel grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Ni |
|
Steel name |
Steel number |
||||||||
En10217-2 |
1.0348 |
≤0.13 |
0.35 |
≤0.70 |
0.025 |
0.020 |
0.30 |
≤0.08 |
0.30 |
EN10217-2 P195GH ERW Steel Tube Mechanical Properties:
Steel grade |
Tensile properties at room temperature |
||||
Upper yield strength |
Tensile strength |
Elongation |
|||
Steel name |
Steel number |
||||
I |
t |
||||
En10217-2 |
1.0348 |
195 |
320-440 |
27 |
25 |
EN10217-2 P195GH ERW Steel Pipe Specification: Maximum Out Diameter: 273mm
EN10217-2 P195GH ERW Steel Tube Application:
1, applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as shell to form cast-in-place concrete piles;
2, predominantly used in the construction of chemical plant, vessels, pipe work and for general mechanical engineering purposes;
3, Line pipe for use in pipeline transportation systems in the petroleum and natural gas industries, applies to pipe;
If you need En10217-2 P195GH ERW steel tube stock or En10217-2 P195GH ERW steel tube machining service, you can contact with Katalor, we can make the P195GH ERW steel tube quotation according to your demands.
TEL : 0086-18317160019
E-mail : [email protected]
Address : No.230,1st Floor,Building No.1,No.221 Of Huashen Road,Free Trade Area Of Pudong New District,Shanghai China