EN10083-3 27MnCrB5-2 alloy steel plate can be named EN10083-3 20MnB5 High Alloy Steel Plate,EN10083-3 20MnB5 High Alloy Steel Plates, EN10083-3 20MnB5 High Alloy Steel Sheets, EN10083-3 20MnB5 High Alloy Steel Sheet .
UT(Ultrasonic examination), AR(As Hot Rolled only), TMCP(Thermal Mechanical Control Processing), N(Normalized), Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting.
EN10083-3 20MnB5 High Alloy Steel Plate are used in The Landing Gear, Shaft, Gear, Solid Rocket Engine Shell, Bearings and So on.
| Grade |
C |
Si Max |
Mn |
P Max |
S Max |
Cr |
Mo |
|
EN10083-3 27MnCrB5-2 |
0.24-0.3 |
0.4 |
1.1-1.4 |
0.025 |
0.035 |
0.3-0.6 |
|
| Grade |
27MnCrB5-2 Mechanical Property |
|||
|
Thickness |
Yield |
Tensile |
Elongation |
|
|
27MnCrB5-2 |
mm |
Min Mpa |
Mpa |
Min % |
|
3<t<=8 |
800 |
1000-1250 |
14 |
|
|
8<t<=20 |
750 |
900-1150 |
14 |
|
| Thickness |
3-250mm |
|
Width |
1220-4200mm |
|
Length |
5000-18000mm |
Notes: coil thickness ≤ 25mm
Katalor welcomes new and old buyers to purchase EN10083-3 27MnCrB5-2 alloy steel plate from katalor. we supply you best service. we settle many problem of EN10083-3 27MnCrB5-2 alloy steel plate from our clients. so, any problem can be send to us. katalor will try it’s best to settle. Welcome to send inquiry to katalor if you want to place an order of EN10083-3 27MnCrB5-2 alloy steel plate.
