SAE1008 steel contains very low carbon so it is called low carbon steel. It is suitable for the stamping and cold forming.
We keep more than 1000 ton SAE1008 steel stock. Based on the stock, we can produce many specifications of SAE1008 steel work / steel structure / steel machining parts based on the customer's requirement.
The following datasheet will provide more details about SAE 1008 steel work .
|
Element |
Content (%) |
|
Iron, Fe |
99.31-99.7 % |
|
Manganese, Mn |
0.30-0.50 % |
|
Carbon, C |
0.10 % |
|
Sulfur, S |
0.050 % |
|
Phosphorous, P |
0.040 % |
|
Properties |
Metric |
Imperial |
|
Density (composition 0.06% C, 0.38% Mn, 0.01% Si, annealed at 925°C) |
7.872 g/cm3 |
0.2844 lb/in³ |
|
Properties |
Metric |
Imperial |
|
Tensile strength |
340 MPa |
49300 psi |
|
Yield strength (depending on temper) |
285 MPa |
41300 psi |
|
Elastic modulus |
190-210 Gpa |
27557-30458 ksi |
|
Bulk modulus (typical for steel) |
200 GPa |
29000 ksi |
|
Shear modulus (typical for steel) |
80.0 GPa |
11600 ksi |
|
Poisson’s ratio |
0.27-0.30 |
0.27-0.30 |
|
Elongation at break (in 50 mm) |
20% |
20% |
|
Reduction of area |
45% |
45% |
|
Hardness, Brinell |
95 |
95 |
|
Hardness, Knoop (converted from Brinell hardness) |
113 |
113 |
|
Hardness, Rockwell B (converted from Brinell hardness) |
55 |
55 |
|
Hardness, Vickers (converted from Brinell hardness) |
98 |
98 |
|
Machinability (based on AISI 1212 steel as 100 machinability) The machinability of group I bar, rod, and wire products can be improved by cold drawing) |
55 |
55 |
|
Properties |
Metric |
Imperial |
|
Thermal expansion co-efficient (@0.000-100°C/32-212°F) |
12.6 µm/m°C |
7 µin/in°F |
|
Thermal conductivity (composition of 0.06% C, 0.4% Mn; 0°C ) |
65.2 W/mK |
452 BTU in/hr.ft².°F |
AISI 1008 low carbon steel is primarily used in extruded, cold headed, cold upset, and cold pressed parts and forms.
SAE 1008 steel machining parts Production technology
Drilling, cutting, bending, welding, groove, correction, edge processing, spraying assembly etc.
Shanghai Katalor has been engaged in the steel work industry for many years. We have much experience in fabricating the SAE 1008 steel work / steel structure / steel machining parts. If you have the demand for this products, please contact us.
