EN 10025-6 S690QL high yield strength steel
EN 10025-6 S690QL high yield strength steel plate
Grade: S690QL steel
Standard: EN 10025-6
Material number: 1.8928
Category: high yield strength steel
S690QL plates thickness: 1.5mm to 150mm
1.8928/S690QL steel tensile requirement
Yield Strength Reh MPa min. |
Tensile Strength Rm MPa |
Elongation after fracture Min. % |
Nominal thickness (mm) |
Nominal thickness (mm) |
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
≥3 ≤50 |
≥50 ≤100 |
≥100 ≤150 |
690 |
650 |
630 |
770 to 940 |
770 to 940 |
710 to 900 |
14 |
Technical support
1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 3.1 / 3.2
3) Charpy Impact tested at -20 / - 46 DegC.
4) Furnace Normalised
5) BQ Plates with IBR form IV
EN 10025-6 S690QL plate is a tempered and weldable fine grained steel. Welcome to send email to
[email protected] if you are interested in our S690QL steel products.
Pre: EN 10025-6 S960QL steel plate specification
Next: How to choose 35# and 45# steel?