EN 10025-4 S460M steel plate is a kind of TMCP (Thermo Mechanical Control Process) rolled weld able fine grain structural steel plate. The delivery condition for EN 10025-4 S460M steel plate must be TMCP rolled way with low temperature impact test. M means -20 min degree impact test. ML means -50 min degree impact test.
EN 10025-4 S460M steel plate Chemical Composition:
Grade |
The Element Max (%) |
||||||
C |
Si |
Mn |
P |
S |
Al |
N |
|
S460M |
0.18 |
0.65 |
1.80 |
0.035 |
0.030 |
0.015 |
0.027 |
Nb |
V |
Ti |
Cu |
Cr |
Ni |
Mo |
|
0.06 |
0.14 |
0.06 |
0.60 |
0.35 |
0.85 |
0.23 |
EN 10025-4 S460M steel plate Mechanical Properties:
Grade |
Thickness |
Yield Strength |
Tensile Strength |
Elongation |
Impact Energy |
(mm) |
MPa (min) |
MPa |
% (min) |
(KV J) (min) |
|
|
|
|
|
-20 degree |
|
S460M |
≤16 |
460 |
540-720 |
17 |
40 |
16> to ≤40 |
440 |
540-720 |
17 |
40 |
|
40> to ≤63 |
430 |
530-710 |
17 |
40 |
|
63> to ≤80 |
410 |
510-690 |
17 |
40 |
|
80> to ≤100 |
400 |
500-680 |
17 |
40 |
|
100> to ≤120 |
385 |
490-660 |
17 |
40 |
EN 10025-4 S460M steel plate Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
EN 10025-4 S460M steel plate have the good weld able and fine grain structural property. So, S460M steel plate can be used into the steel structural or welded vessel or pressure vessels. At the same time, EN 10025-4 S460M steel plate also can be used in the offshore or any other applications which request the high tensile strength.
Shanghai Katalor Enterprises Co., Ltd is a professional EN10025-4 S460M steel plate manufacture and supplier. If you have any need of steel plate, please do not hesitate to contact us.