ASTM A573/A573M A573 Grade 65 carbon steel plate shall be made to fine grain practice,when the steel plate A573 Grade 65 is to be welded,it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized.
The carbon structural steel plate of A573Gr65 shall be conform to the requirements prescribed in the below table.The yield strength of steel plate A573Gr65 shall above 240Mpa,and the tensile strength of A573 Grade 65 shall be within 450-530Mpa.
Steel Name:A573 Gr.65 Carbon steel plate,A573 Grade 65 Structure steel plate
Steel Standard: ASTM A 573/A573M
Thickness:2mm-650mm
Width:1200mm-4200mm
Length:3000mm-18000mm
Mechnical property for A573 Grade 65 mild steel:
Grade |
Thickness(mm) |
Min Yield (Mpa) |
Tensile(MPa) |
Elongation(%) |
A573 Gr.65 |
6mm-40mm |
240Mpa |
450-530Mpa |
23% |
40mm-100mm |
… |
… |
… |
|
The min impact energy is longitudinal energy |
Chemical composition for A573 Grade 65 carbon steel (Heat Analysis Max%)
Main chemical elements composition of A573 Grade 65 |
|||||
Thickness(mm) |
C |
Si |
Mn |
P |
S |
T≤13 |
0.24 |
0.15-0.40 |
0.85-1.20 |
0.035 |
0.04 |
13<T |
0.26 |
Katalor is specialized in supplying ASTM steel plate in A573 GRADE 65. For more information of A573 GRADE 65 steel plates
Shanghai Katalor Industry Co., Ltd supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry, with advanced technology and services, if you need ASTM A573 Grade 65 steel, please give us a message.
TEL:0086-21-61182423
Fax :0086-21-61182425
E-mail:[email protected]
Skype:katalor
Phone:0086-18317160019
Pre: BS EN10028-5 P355M Hot rolled steel for pressure vessels
Next: A573 Grade 70 ASTM Common carbon structural steel plate