St52-3 steel plate, conforming to DIN17100 standard St52-3 steel plate, in accordance with DIN17100 standard, we can regard St52-3 steel plate as low alloy steel St52-3 steel plate is a kind of mainly low alloy steel, General DIN17100 ST52-3 steel is used for mechanical parts, mobile equipment, cranes, booms, chassis, buildings, bridges and most structural activities.St52-3 steel plate is DIN standard Alloy steel equals DIN17100: St52-3, JIS: SS490 / SM490A, BS: 50B and UNI7070: Fe510B.
ST52-3 DIN17100 |
Comparison of steel grades |
|
EN10025:1990 |
FE 510 B |
|
EN 10025-2 |
S355JR |
|
ASTM |
A572GR50 |
|
JIS |
SS490/SM490A |
|
NFA 35-501 |
E36-2 |
|
BS1449 |
50B |
|
UNI7070 |
FE 510 B |
DIN17100 St52-3 steel plate Mechanical properties:
thickness |
Yield StrengthReH |
Tensile StrengthRm |
Fracture Elongation |
Notch Impact Energy1)Ch |
t≤ 16mm t >16mm |
355 345 |
|
|
20 degree 27J |
t < 3mm t ≥ 3mm |
|
510-680 490-630 |
|
|
Up to 1.5mm 1.51-2.00mm 2.01-2.50mm 2.51-2.99mm ≥ 3mm |
|
|
13 14 15 16 20 |
DIN17100 St52-3 steel plate Chemical analysis:
Chemical elements |
C≤ 16mm max |
C>16mm max |
Si |
Mn max |
P |
S |
%,by mass |
0.24 |
0.24 |
0.55 |
1.60 |
0.045 |
0.045 |
DIN17100 ST52-3 steel is a low alloy, high strength structural steel that can be easily welded to other weldable steels. The mechanical properties of ST52-3 steel are yield strength greater than 355 MPa and tensile strength 490-630 MPa.
ST52-3 steel has low carbon equivalent and good cold forming properties. DIN17100 ST52-3 steel plates are supplied under standardized or controlled rolling conditions. ST52-3 steel has a variety of applications. Katalor is one of famous DIN17100 ST52-3 steel supplier in china. Welcome to contact katalor if you are looking for the best supplier of T52-3 steel.
Pre: The introduce for ASME SA283 Gr.C mild steel and alloy steel’s Comparison and selection