JISG4304 SUS 347 stainless steel plate use, protection and maintenance

JISG4304 SUS 347 stainless steel plate use:
JISG4304 SUS 347 stainless steel plate must be peeled off in time after installation. After that, JISG4304 SUS 347 stainless steel plate should also be cleaned with special stainless steel cleaner. The common way is to use talcum powder (double fly powder) from scratch. After rubbing it to the end, it is best to wipe it again with clean water and wipe it off. The reason why the film should be peeled off in time is to avoid the phenomenon that the glue is too long or the film may not be rusted.
JISG4304 SUS 347 stainless steel plate tears off the film in time after installation, and can also find the surface problem in time; prevent the contamination of liquid or corrosive liquid into the film and not find it, so that the board surface is in a humid and corrosive environment for a long time. Severe corrosion of the board surface.
 

JISG4304 SUS 347 stainless steel plate protection:
If other projects are not completed, other protective measures must be taken to protect the surface of the stainless steel plate after the film is removed. Splashing of cement or mortar can be the most common accidental damage on construction sites. As with other building materials, splashed mortars should be treated with a large amount of water before they solidify. Otherwise, it is difficult or even impossible to remove the dried solidified mortar from the stainless steel surface without leaving any traces. Detergents that are used to remove mortar from tiles are definitely not used in stainless steel because they generally contain strong chemicals that corrode stainless steel.
 

Maintenance of JISG4304 SUS 347 stainless steel plate:
After delivery, take care to keep the JISG4304 SUS 347 stainless steel plate clean and dry, which is the most direct and simple way to prevent rust of JISG4304 SUS 347 stainless steel plate.
JISG4304 SUS 347 stainless steel plate should be taken care of, if it is in the dry season, only need to clean the dust and dirt every 3-4 months, then wipe the surface with clean water. Every year, typhoon or plum rain, pay attention to timely clean the stainless steel surface with clean water to prevent the salty liquid from combining dust and dirt corrosion on the surface of JISG4304 SUS 347 stainless steel plate

Pre: The main disadvantages of ASTM A240 430 ferritic stainless steel

Next: Effect of nickel on JISG4304 SUS 201 stainless steel