1. Steel grade: ASTM A709 GR 50W steel plate
2. ASTM 709 AGR 50W steel plate Specifications: thickness ≤ 4in. (≤ 100mm).
3. Plate size, shape, weight requirements and allow deviation
Steel size, shape, weight requirements and allowable deviation should be consistent with the provisions of the relevant provisions of ASTM A6 / 6M.
4.ASTM A709 GR 50W steel plate Technical requirements
Chemical composition (smelting composition) shall comply with the provisions of ASTM A709 / A709M-11 and Table 1.
ASTM A709 GR 50W steel plate Melting ingredients (Wt%)
grade |
C |
Si |
Mn |
P |
S |
Cu |
Ni |
Cr |
Ti |
V |
Al |
CE |
ASTM A709 GR 50W steel plate |
≤ |
0.15 |
1.00 |
≤ |
≤ |
0.20 |
≤ |
0.40 |
≤ |
0.01 |
≥ |
≤ |
Note 1: The allowable deviation of the chemical composition of the finished steel should comply with the corresponding provisions of ASTM A709 / A709M-11. |
ASTM A709 GR 50W steel plate Mechanical properties:
grade |
thickness≤4in.(≤100mm) |
thickness≤2in. |
thickness>2in.~4in. |
|||
Yield point or yield strength |
tensile strength |
Elongation A |
10℉(-12℃) |
10℉(-12℃) |
||
L0=2in. |
L0=8in. |
|||||
ASTM A709 GR 50W steel plate |
50~75.4 |
≥70 |
≥21 |
≥18 |
≥15 |
≥20 |
Note 1: Plate width greater than 24in. (600mm) of steel, the elongation allowed to reduce 2%. |
Katalor is the supplier of ASTM A709 GR 50W steel plate . we can supply more about ASTM A709 GR 50W steel plate. ASTM A709 GR 50W steel plate’s clients can get one-class service form us. and please send enquiry if you want to get an offer form us.
Pre: More accurate information for ASME SA514 Grade(Gr) P high strength steel plate
Next: Cost-effective products of SA514Grade E (SA514GRE) steel plate under ASME