Inspection process of API 5L X56 PSL1 steel pipe supplied by katalor company

This charpt is about the Inspection process of API 5L X56 PSL1 steel pipe supplied by katalor company.API 5L X56 PSL1 steel pipes shall be submitted for acceptance in batches, and the group approval rules shall comply with the relevant product standard API. 

API 5L X56 PSL1 steel pipe inspection project, the number of samples, sampling location and test method should comply with the relevant product standard API. API 5L X56 PSL1 steel pipes can be sampled in batches according to the rolling stock with the required consent.

For the test results of API 5L X56 PSL1 steel pipe, if one does not meet the requirements of the product standard API, it should be selected. Two times the same batch of API 5 l X56 PSL1 steel pipes were taken and the unqualified items were re-inspected. If the re-inspection results (including any indicators required for the project test) fail, the batch of API 5L X56 PSL1 steel tubing shall not be delivered. When the following inspection items fail the initial inspection, re-inspection is not allowed. A. White spots in low power tissue; B. Microstructure.

Katalor has a long story on supplying API 5L X56 PSL1 steel pipe.katalor welcome new and old client of API 5L X56 PSL1 steel pipe to visit our company.

Pre: EN10025 S275JR steel plate Metod of deoxidation FN rimming steel not permitted

Next: The hazard of the API 5L Gr.B PSL1 welded pipe over-high welding height